Millplus backplot 

Please set the backplot control to Millplus in the backplot settings for Edit5

The sign "+" means that function is supported.
The sign "" means that function is not supported.

G0 +
G1 +
G2/G3 +
G4 +
G6 
G7 +
G8 
G9 +
G11 +
G14 +
G17/G18/G19 + (tool orientation doesn't change).
G22 +
G23 +
G25/G26 
G27/G28 
G29 +
G33/G36/G37 
G39  
G40/G41/G42/G43/G44 +
G45/G46/G46/G49/G50 
G51/G52 
G53/G54/G55/G56/G57/G58/G59 +
G61/G62 
G63/G64 
G70/G71 +
G72/G73 +
G74 +
G77 +
G78 +
G79 +
G81 +
G83 +
G84 +
G85 +
G86 +
G87 +
G88 +
G89 +
G90/G91 +
G92/G93 +
G94/G95 +
G96/G97 
G98/G99 
G106/G108/G125/G126/G136/G137 
G141 
G145/G148/G149/G150 
G153/G154 
G174 +
G180/G182 
G195/G196/G197/G198/G199 

G200/G201/G202/G203/G204/G205/G206/G207/G208  (but we plan to implement these functions)

G217/G218 
G227/G228/G240/G241 

All functions in range 300-399 are NOT supported.

All functions in range 600-699 are NOT supported.

All functions in range 700-799 are supported (exclude G700).

All functions in range 800-999 are NOT supported.

M0/M1/M30 +
M3/M4/M5/M19 +
M6/M66 +
M7/M8/M9 +
M13/M14 +

Other M functions are NOT supported.

S, F, T +
